|
|
|
National Stock Number:
5315-00-817-0889
Federal Supply Class:
5315
National Item Identification Number:
008170889
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 10122744 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 104A901876 | 34228 | L3 TECHNOLOGIES, INC. | | 249050-2 | 82577 | RAYTHEON COMPANY | | 5315008170889 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 416148-601 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 5315008170889 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 946339-601 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | MS16555-601 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | 5315PL1382933 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | MS16555-601 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATERIAL | STEEL COMP 410 OR | | STEEL COMP 416 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A493 ASSN STD 1ST MATERIAL RESPONSE OR | | ASTM A582 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND | | 42.0 ROCKWELL C MAXIMUM OVERALL | | SHEAR STRENGTH | 610 DOUBLE POUND | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.033 INCHES NOMINAL | | FIRST END TAPER ANGLE | 4.0 DEGREES MINIMUM AND | | 16.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SQUARE | | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 0.177 INCHES MINIMUM AND | | 0.197 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.0626 INCHES MINIMUM AND | | 0.0628 INCHES MAXIMUM |
|
|