|
|
|
National Stock Number:
5315-00-823-8735
Federal Supply Class:
5315
National Item Identification Number:
008238735
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 1609235-56 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 5315008238735 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 589924 | 21450 | ARMY WEAPONS COMMAND ATTN AMSWE-REE-S | | MS16555-49 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 5315008238735 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM AND | | 64.0 ROCKWELL C MAXIMUM OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.008 INCHES MINIMUM AND | | 0.031 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 4.0 DEGREES MINIMUM AND | | 12.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER LENGTH | 0.021 INCHES NOMINAL | | SECOND END TAPER ANGLE | 20.0 DEGREES MINIMUM AND | | 30.0 DEGREES MAXIMUM | | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 1.240 INCHES MINIMUM AND | | 1.260 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.2501 INCHES MINIMUM AND | | 0.2503 INCHES MAXIMUM | | FEATURES PROVIDED | CASEHARDENED | | SPECIAL FEATURES | SMALL CHAMFER END MAY BE 0.008 IN. MIN,0.031 IN. MAX RADIUS IN LIEU OF CHAMFER | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 96906 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS16555-49 |
|
|