|
|
|
National Stock Number:
5315-00-829-8006
Federal Supply Class:
5315
National Item Identification Number:
008298006
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 36-5075-502 | 81205 | THE BOEING COMPANY | | 36-5075-502 | 82918 | THE BOEING COMPANY |
|
Techincal Specification:
| UNDER HEAD LENGTH | 0.480 INCHES NOMINAL | | DIAMETER | 0.180 INCHES MINIMUM AND | | 0.185 INCHES MAXIMUM | | HEAD STYLE | THUMB NO. 4 | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | CHAMFER LENGTH | 0.030 INCHES NOMINAL | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | HEAD WIDTH | 0.300 INCHES NOMINAL | | HEIGHT | 0.480 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | DRILLED THRU HEAD | | FIRST HOLE DIAMETER | 0.125 INCHES MINIMUM AND | | 0.130 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.810 INCHES NOMINAL | | SPECIAL FEATURES | END OF PIN HAS 45.0 DEG BEVEL FROM POINT OF CHAMFER | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 81205 | | DESIGN CONTROL REFERENCE | 36-5075-502 |
|
|