|
|
|
National Stock Number:
5315-00-830-5162
Federal Supply Class:
5315
National Item Identification Number:
008305162
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 9757E30 | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES, INC. | | 9757E30 | 13002 | GOODRICH CORPORATION | | 9757E30 | 1DDX0 | MACHINE SPECIALTIES, LLC | | 9757E30 | 1FG56 | HYDROMACH INC | | 9757E30 | 1SJ80 | JOHNSON MANUFACTURING, INC. | | 9757E30 | 29560 | BEMSCO INC | | 9757E30 | 2V343 | APEX MANUFACTURING COMPANY, INC. | | 9757E30 | 32664 | AEROMETALS, INC. | | 9757E30 | 3H683 | INTERNATIONAL PRECISION, INC | | 9757E30 | 4T683 | AERO TECHNOLOGY COMPANY | | 9757E30 | 58078 | AIRTRONICS, LLC | | 9757E30 | 5ZBP4 | HDI LANDING GEAR USA INC | | 9757E30 | 6Z056 | CM MANUFACTURING INC | | 9757E30 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 9757E30 | 79U29 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.628 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | FIRST END LOCATION | SHOULDER END | | FIRST HOLE DIAMETER | 0.254 INCHES MINIMUM AND 0.256 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | OVERALL LENGTH | 4.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7108,C1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SQUARE | | SHANK DIAMETER | 0.9985 INCHES MINIMUM AND 0.9995 INCHES MAXIMUM | | SHANK LENGTH | 0.904 INCHES NOMINAL | | SHOULDER DIAMETER | 1.2485 INCHES MINIMUM AND 1.2495 INCHES MAXIMUM | | SPECIAL FEATURES | BODY HOLLOWED 0.860 IN. DIA,2.800 IN. DP THEN 0.500 IN. DIA FOR 0.690 IN.; CADMIUM PLATE OD ONLY,SHOT PEEN AND CHROME PLATE BOTH ENDS | | STYLE DESIGNATOR | SHOULDER | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMIUM OVERALL |
|
|