| CHAMFER LENGTH | 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| DIAMETER | 0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.100 INCHES NOMINAL |
| FIRST HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM |
| HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD STYLE | FLAT |
| HEIGHT | 0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL CORROSION RESISTING OVERALL |
| PIN HEAD DIAMETER | 0.350 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| PIN CHAMFER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| STYLE DESIGNATOR | STRAIGHT |
| UNDER HEAD LENGTH | 2.330 INCHES MINIMUM AND 2.350 INCHES MAXIMUM |