|
|
|
National Stock Number:
5315-00-842-9497
Federal Supply Class:
5315
National Item Identification Number:
008429497
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 10891605 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 5315008429497 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5315008429497 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1045 OR | | STEEL COMP 1050 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | HARDNESS RATING | 50.0 ROCKWELL C MINIMUM AND | | 58.0 ROCKWELL C MAXIMUM OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.250 INCHES NOMINAL | | FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.234 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.234 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.313 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 3.969 INCHES NOMINAL | | PIN OVERALL LENGTH | 4.594 INCHES NOMINAL | | PIN OVERALL DIAMETER | 1.4950 INCHES MINIMUM AND | | 1.5010 INCHES MAXIMUM | | FEATURES PROVIDED | CASEHARDENED | | SPECIAL FEATURES | DRILLED HOLES AT BOTH ENDS ON LONGITUDINAL AXIS TAPPED 1/2-20 UNF-2B BY 0.750 IN. DEEP W/82 DEG COUNTERSUNK FROM 0.625 IN. DIA |
|
|