|
|
|
National Stock Number:
5315-00-845-5110
Federal Supply Class:
5315
National Item Identification Number:
008455110
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 1803-816-1 | 99167 | HAMILTON SUNDSTRAND CORPORATION | | 5315008455110 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5315008455110 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | MS16555-48 | 8M752 | ALATEC PRODUCTS | | MS16555-48 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| FEATURES PROVIDED | CASEHARDENED | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 4.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.031 INCHES MINIMUM AND 0.062 INCHES MAXIMUM | | HARDNESS RATING | 47.0 ROCKWELL C MINIMUM AND 58.0 ROCKWELL C MAXIMUM OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMSTM A29 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PIN OVERALL LENGTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.2501 INCHES MINIMUM AND 0.2503 INCHES MAXIMUM | | SECOND END CORNER RADIUS | 0.083 INCHES MAXIMUM | | SECOND END STYLE | RADIUS | | SECOND END TAPER LENGTH | 0.193 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SHEAR STRENGTH | 12800 DOUBLE POUND | | SPECIAL FEATURES | RADIUS END MAY BE CHAMFERED 25.0 DEGREES | | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER |
|
|