|
|
|
National Stock Number:
5315-00-847-5751
Federal Supply Class:
5315
National Item Identification Number:
008475751
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 038144 | 89305 | SIMMONDS PRECISION PRODUCTS INC | | 10055467 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 104A901892 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH | | 5315008475751 | A00AM | E.C.A ETABLISSEMENT CENTRAL DESAPPROVISIONNEMENTS DES FORCES ARMEE | | 5315008475751 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | 5315PL0971886 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | D17-750 | 00141 | ROLLER BEARING CO OF AMERICA, INC | | DYRA300 | 05624 | GE AVIATION SYSTEMS LLC | | MS16555-629 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS16555-629 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | FIRST END TAPER ANGLE | 4.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.158 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 42.0 ROCKWELL C MAXIMUM OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A493 ASSN STD 1ST MATERIAL RESPONSE OVERALL OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 410 OVERALL OR STEEL COMP 416 OVERALL | | PIN OVERALL DIAMETER | 0.1251 INCHES MINIMUM AND 0.1253 INCHES MAXIMUM | | PIN OVERALL LENGTH | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND END CORNER RADIUS | 0.041 INCHES MAXIMUM | | SECOND END STYLE | RADIUS | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SPECIAL FEATURES | RADIUS END MAY BE CHAMFERED 25 DEG |
|
|