|
|
|
National Stock Number:
5315-00-857-6805
Federal Supply Class:
5315
National Item Identification Number:
008576805
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 52C535-1 | 03111 | BLISS E W CO GULF AND WESTERN MFG CO SUB OF GULF AND WESTERN INDUSTRIES | | 52C535-1 | 21439 | CURTISS-WRIGHT FLOW CONTROL SERVICE, LLC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1141 OR | | STEEL COMP 4140 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.021 INCHES MINIMUM AND | | 0.041 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.115 INCHES MINIMUM AND | | 0.135 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.240 INCHES MINIMUM AND | | 0.260 INCHES MAXIMUM | | PIN OVERALL LENGTH | 2.115 INCHES MINIMUM AND | | 2.135 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.7480 INCHES MINIMUM AND | | 0.7500 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 21439 | | DESIGN CONTROL REFERENCE | 52C535-1 |
|
|