| CENTER TO CENTER DISTANCE BETWEEN HOLES | 5.530 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| FIRST END TAPER LENGTH | 0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| INSIDE DIAMETER | 0.560 INCHES MINIMUM AND 0.620 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-6736,TY 1,COND N MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| PIN OVERALL DIAMETER | 0.9960 INCHES MINIMUM AND 0.9980 INCHES MAXIMUM |
| PIN OVERALL LENGTH | 5.970 INCHES MINIMUM AND 6.030 INCHES MAXIMUM |
| MATERIAL | STEEL COMP 4130 OVERALL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SECOND HOLE DIAMETER | 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171,5.3.1.2 MIL STD SINGLE TREATMENT RESPONSE OVERALL |