|
|
|
National Stock Number:
5315-00-872-3277
Federal Supply Class:
5315
National Item Identification Number:
008723277
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 114S1757-1 | 77272 | THE BOEING COMPANY | | 114S1757-1 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,COND F MIL SPEC ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MS2.01 MFR REF ALL TREATMENT RESPONSES OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 0.342 INCHES MINIMUM AND | | 0.362 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.371 INCHES MINIMUM AND | | 0.373 INCHES MAXIMUM | | SHANK DIAMETER | 0.246 INCHES MINIMUM AND | | 0.248 INCHES MAXIMUM | | OVERALL LENGTH | 2.302 INCHES MINIMUM AND | | 2.322 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.052 INCHES MINIMUM AND | | 0.072 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 15.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SLOTTED | | SECOND END SLOT DEPTH | 0.115 INCHES MINIMUM AND | | 0.135 INCHES MAXIMUM | | SECOND END SLOT WIDTH | 0.084 INCHES MINIMUM AND | | 0.104 INCHES MAXIMUM | | FIRST END LOCATION | SHANK END | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.084 INCHES MINIMUM AND | | 0.104 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.084 INCHES MINIMUM AND | | 0.104 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.692 INCHES MINIMUM AND | | 0.732 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.850 INCHES MINIMUM AND | | 0.890 INCHES MAXIMUM | | SURFACE FINISH | 125.000 MICROINCHES OVERALL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 77272 | | DESIGN CONTROL REFERENCE | 114S1757-1 |
|
|