| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.870 INCHES MINIMUM AND 2.890 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM |
| HARDNESS RATING | 50.0 ROCKWELL B MINIMUM OVERALL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4117,COMP 6061,TEMPER TG ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY OVERALL |
| PIN OVERALL DIAMETER | 0.2770 INCHES MINIMUM AND 0.2790 INCHES MAXIMUM |
| PIN OVERALL LENGTH | 3.050 INCHES MINIMUM AND 3.070 INCHES MAXIMUM |
| SECOND HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2470 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE FINISH | 125.0 MICROINCHES OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |