|
|
|
National Stock Number:
5315-00-930-4209
Federal Supply Class:
5315
National Item Identification Number:
009304209
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| L-4525-1 | 46717 | PETTIBONE LLC | | L4525-1 | 46717 | PETTIBONE LLC |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.624 INCHES MINIMUM AND 1.628 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.435 INCHES MINIMUM AND 0.439 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.375 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | PIN OVERALL LENGTH | 4.625 INCHES NOMINAL | | PIN OVERALL DIAMETER | 1.7480 INCHES MINIMUM AND 1.7490 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 5.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.125 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND HOLE DIAMETER | 0.377 INCHES NOMINAL | | SPECIAL FEATURES | 0.250 IN. DIA HOLE IN CENTER |
|
|