|
|
|
National Stock Number:
5315-00-932-5596
Federal Supply Class:
5315
National Item Identification Number:
009325596
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 2L6433-1 | 78062 | SARGENT AEROSPACE & DEFENSE, LLC | | 2L6433-1 | 86831 | SAFRAN ELECTRONICS & DEFENSE, AVIONICS USA, LLC |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.790 INCHES MINIMUM AND 0.830 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.080 INCHES MINIMUM AND 0.120 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM | | FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND 0.050 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303S OVERALL | | PIN OVERALL DIAMETER | 0.18725 INCHES MINIMUM AND 0.18775 INCHES MAXIMUM | | PIN OVERALL LENGTH | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|