|
|
|
National Stock Number:
5315-00-936-0380
Federal Supply Class:
5315
National Item Identification Number:
009360380
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 2629515 | 06848 | HONEYWELL INTERNATIONAL INC |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.300 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.100 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.015 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.0435 INCHES MINIMUM AND 0.0495 INCHES MAXIMUM | | HARDNESS RATING | 35.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5610 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 416F OVERALL | | PIN OVERALL LENGTH | 1.500 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.1253 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.0435 INCHES MINIMUM AND 0.0495 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|