|
|
|
National Stock Number:
5315-00-951-3287
Federal Supply Class:
5315
National Item Identification Number:
009513287
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 3321-964 | 90073 | CMC ELECTRONICS INC |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.203 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.188 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.016 INCHES NOMINAL | | FIRST END LOCATION | BOTH ENDS | | FIRST HOLE DIAMETER | 0.073 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | OVERALL LENGTH | 6.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | NOMINAL THREAD SIZE | 0.312 INCHES | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.073 INCHES NOMINAL | | SECOND SHANK DIAMETER | 0.312 INCHES NOMINAL | | SECOND SHANK LENGTH | 3.875 INCHES NOMINAL | | SHANK DIAMETER | 0.250 INCHES NOMINAL | | SHANK LENGTH | 2.000 INCHES NOMINAL | | SHOULDER DIAMETER | 0.438 INCHES NOMINAL | | STYLE DESIGNATOR | SHOULDER | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2A | | THREAD LENGTH | 1.625 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNC |
|
|