|
|
|
National Stock Number:
5315-00-989-0821
Federal Supply Class:
5315
National Item Identification Number:
009890821
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| CD-271 | 08484 | BREEZE-EASTERN LLC | | CD271 | 08484 | BREEZE-EASTERN LLC |
|
Techincal Specification:
| FIRST HOLE DIAMETER | 0.0785 INCHES MINIMUM AND 0.0788 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.020 INCHES MAXIMUM | | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OVERALL | | HOLE ARRANGEMENT STYLE | DRILLED THRU CENTER | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP E4340 OR STEEL COMP 4340 OVERALL | | PIN OVERALL DIAMETER | 0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM | | PIN OVERALL LENGTH | 2.113 INCHES MINIMUM AND 2.118 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SURFACE FINISH | 16.0 MICROINCHES SHANK END | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-16232,TY2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE ZINC OVERALL | | TEST DATA DOCUMENT | 81343-MIL-I-6848 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|