|
|
|
National Stock Number:
5315-01-010-6229
Federal Supply Class:
5315
National Item Identification Number:
010106229
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 196B7211 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66,CARBON OR ALLOY FED STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PHOSPHATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171,FINISH 5.3.1.2 OR 5.3.2.2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND | | 40.0 ROCKWELL C MAXIMUM OVERALL | | SHEAR STRENGTH | 23000 DOUBLE POUNDS PER SQUARE INCH | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.015 INCHES MINIMUM AND | | 0.045 INCHES MAXIMUM | | FIRST END CORNER RADIUS | 0.031 INCHES MINIMUM AND | | 0.093 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 20.0 DEGREES MINIMUM AND | | 30.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | RADIUS | | SECOND END CORNER RADIUS | 0.031 INCHES MINIMUM AND | | 0.093 INCHES MAXIMUM | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | PIN OVERALL LENGTH | 2.260 INCHES MINIMUM AND | | 2.280 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.3752 INCHES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 05606 | | DESIGN CONTROL REFERENCE | 196B7211 |
|
|