|
|
|
National Stock Number:
5315-01-033-8706
Federal Supply Class:
5315
National Item Identification Number:
010338706
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 549AS106-1 | 05DN8 | KLUNE INDUSTRIES, INC. | | 549AS106-1 | 072E5 | VERTEX MODERNIZATION AND SUSTAINMENT LLC | | 549AS106-1 | 09245 | SOLO ENTERPRISE CORP. | | 549AS106-1 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 549AS106-1 | 32067 | MARVIN ENGINEERING CO, INC |
|
Techincal Specification:
| MATERIAL | COBALT COMP MP-35-N OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5758 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.030 INCHES MINIMUM AND | | 0.050 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.155 INCHES MINIMUM AND | | 0.160 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.155 INCHES MINIMUM AND | | 0.160 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.156 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.718 INCHES NOMINAL | | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 2.031 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.4970 INCHES MINIMUM AND | | 0.4990 INCHES MAXIMUM | | SPECIAL FEATURES | FLATTED TO 0.367 IN. MIN 0.370 IN. MAX HEIGHT ALONG ENTIRE LENGTH |
|
|