|
|
|
National Stock Number:
5315-01-038-2356
Federal Supply Class:
5315
National Item Identification Number:
010382356
Description:
PIN,GROOVED,HEADLESS
Detail:
A headless item of various shapes, usually cylindrical, having either circular or longitudinal groove(s). Its length must not exceed 12 inches (304 MM). Excludes ROD, GROOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
|
Manufacturer Information:
| 12006408 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | HARDNESS RATING | 38.0 ROCKWELL C MINIMUM AND | | 43.0 ROCKWELL C MAXIMUM OVERALL | | STYLE DESIGNATOR | GROOVE | | OVERALL LENGTH | 3.400 INCHES NOMINAL | | DIAMETER | 0.511 INCHES NOMINAL | | EFFECTIVE LENGTH | 2.540 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.360 INCHES NOMINAL | | UNDERCUT WIDTH | 0.039 INCHES NOMINAL | | SECOND UNDERCUT WIDTH | 0.039 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.040 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER LENGTH | 0.140 INCHES NOMINAL | | SECOND END TAPER ANGLE | 30.0 DEGREES NOMINAL | | FIRST END LOCATION | BOTH ENDS | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.190 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.182 INCHES NOMINAL | | SURFACE FINISH | 125.0 MICROINCHES SHANK END | | SPECIAL FEATURES | BOTH UNDERCUTS CHAMFERED AT 45 DEG FROM UNDERCUT BOTTOM ON SIDE TOWARDSMIDDLE OF PIN HAS RING AS HANDLE IN 0.190 IN DIA HOLE,RING 1.380 ID FROM 0.120 IN DIA WIRE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 19204 | | DESIGN CONTROL REFERENCE | 12006408 |
|
|