|
|
|
National Stock Number:
5315-01-049-0156
Federal Supply Class:
5315
National Item Identification Number:
010490156
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 10122862 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 2701635 | 3H889 | PARKER-HANNIFIN CORPORATION | | 2701635 | 92003 | PARKER HANNIFIN CORPORATION DIV AEROSPACE GROUP HEADQUARTERS |
|
Techincal Specification:
| UNDER HEAD LENGTH | 0.510 INCHES NOMINAL | | DIAMETER | 0.184 INCHES MINIMUM AND | | 0.186 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | IRON ALLOY 660 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CHROMIUM OVERALL | | CHAMFER LENGTH | 0.020 INCHES NOMINAL | | PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.312 INCHES NOMINAL | | HEIGHT | 0.047 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.065 INCHES MINIMUM AND | | 0.072 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.070 INCHES NOMINAL | | SURFACE FINISH | 63.0 MICROINCHES HEAD BEARING SURFACE | | 32.0 MICROINCHES LARGE SHANK | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 3H889 | | DESIGN CONTROL REFERENCE | 2701635 |
|
|