|
|
|
National Stock Number:
5315-01-050-6111
Federal Supply Class:
5315
National Item Identification Number:
010506111
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 106C7149P15 | 07482 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4140 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OR | | ZINC AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE AND | | QQ-Z-325 TYPE 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.161 INCHES MINIMUM AND | | 0.181 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.161 INCHES MINIMUM AND | | 0.181 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.410 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 3.927 INCHES MINIMUM AND | | 3.947 INCHES MAXIMUM | | PIN OVERALL LENGTH | 4.790 INCHES NOMINAL | | PIN OVERALL DIAMETER | 1.2485 INCHES MINIMUM AND | | 1.2490 INCHES MAXIMUM |
|
|