|
|
|
National Stock Number:
5315-01-050-9758
Federal Supply Class:
5315
National Item Identification Number:
010509758
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| BACP18C3-94 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1020 OR | | STEEL COMP 1025 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL | | FIRST END SLOT DEPTH | 0.029 INCHES MINIMUM AND | | 0.045 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SLOTTED | | SECOND END SLOT WIDTH | 0.037 INCHES MINIMUM AND | | 0.050 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.070 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.070 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.120 INCHES MINIMUM AND | | 0.130 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.670 INCHES MINIMUM AND | | 0.700 INCHES MAXIMUM | | PIN OVERALL LENGTH | 0.940 INCHES MINIMUM AND | | 0.950 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.1860 INCHES MINIMUM AND | | 0.1900 INCHES MAXIMUM | | SPECIAL FEATURES | CHAMFER ON SLOTTED END 45 DEGREES NOM BY 0.030 IN. LG |
|
|