| FIRST STEP DIAMETER | 0.749 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| FIRST STEP LENGTH | 0.437 INCHES NOMINAL |
| HEAD STYLE | FLAT CHAMFER |
| HEIGHT | 1.125 INCHES NOMINAL |
| OVERALL LENGTH | 2.937 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 302 OVERALL |
| NUMERIC DESIGNATION OF STEP ECCENTRIC TO HEAD | 2 |
| OFFSET DISTANCE BETWEEN GEOMETRIC CENTER OF HEAD AND CENTERLINE OF SHANK/SHOULDER | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| PIN HEAD DIAMETER | 0.433 INCHES MINIMUM AND 0.436 INCHES MAXIMUM |
| SECOND STEP LENGTH | 0.968 INCHES NOMINAL |
| SECOND STEP DIAMETER | 0.499 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| SPECIAL FEATURES | WITH 1/16 IN. BY 45 DEG CHAMFER ON HEAD END AND 1/32 IN. BY 45 DEG CHAMFER ON SHOULDER END |
| STYLE DESIGNATOR | ECCENTRIC |
| SURFACE FINISH | 63.0 MICROINCHES SHOULDER END |
| THIRD STEP DIAMETER | 0.247 INCHES MINIMUM AND 0.248 INCHES MAXIMUM |
| THIRD STEP LENGTH | 0.407 INCHES NOMINAL |