|
|
|
National Stock Number:
5315-01-051-1022
Federal Supply Class:
5315
National Item Identification Number:
010511022
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| BACP18CDD3-302 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 2024 OR | | ALUMINUM ALLOY 2017 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/3,T4 FED SPEC 1ST MATERIAL RESPONSE AND | | QQ-A-225/5,T4 FED SPEC 2ND MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.029 INCHES MINIMUM AND | | 0.045 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES MINIMUM AND | | 30.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.070 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.070 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.120 INCHES MINIMUM AND | | 0.130 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.760 INCHES MINIMUM AND | | 2.770 INCHES MAXIMUM | | PIN OVERALL LENGTH | 3.020 INCHES MINIMUM AND | | 3.030 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.1860 INCHES MINIMUM AND | | 0.1900 INCHES MAXIMUM | | SPECIAL FEATURES | WITH SCREW DRIVER SLOT ONE END ONLY | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 81205 | | DESIGN CONTROL REFERENCE | BACP18CDD3-302 |
|
|