|
|
|
National Stock Number:
5315-01-055-1444
Federal Supply Class:
5315
National Item Identification Number:
010551444
Description:
PIN,COTTER
Detail:
A half round, cylindrical, or flat piece of metal, bent to form a straight or crimped two-pronged device with an eye at one end, for inserting in a hole drilled at right angle to the axis of the stud, shaft, or like item. Its ends are separable or one end is bent to hold it in place.
|
Manufacturer Information:
| 12461146 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 23655 | 65029 | MATTHEW WARREN, INC | | MS24665-368 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS24665-368 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTMA380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 140.0 ROCKWELL F MINIMUM AND | | 220.0 ROCKWELL F MAXIMUM AND | | 55.0 ROCKWELL SUPERFICIAL 15-N MINIMUM AND | | 67.0 ROCKWELL SUPERFICIAL 15-N MAXIMUM OVERALL | | STYLE DESIGNATOR | STANDARD | | DIAMETER | 0.125 INCHES NOMINAL | | UNDERLOOP LENGTH | 0.750 INCHES NOMINAL | | POINT TYPE | EXTENDED PRONG SQUARE CUT OR | | HAMMER LOCK | | SPECIAL FEATURES | POINT TYPES SHALL BE EXTENDED PRONG SQUARE (PLAIN) CUT OR HAMMER LOCK;RECCOMMENDED HOLE SIZE IS 0.141 INCHES | | SPECIFICATION/STANDARD DATA | 80205-NASM24665 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD | | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY NAVORD OD42046 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, COTTER, SPLIT |
|
|