|
|
|
National Stock Number:
5315-01-068-4713
Federal Supply Class:
5315
National Item Identification Number:
010684713
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| MS16556-66 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | NASM16556-66 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 60.0 ROCKWELL C NOMINAL OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.047 INCHES MINIMUM AND | | 0.125 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER LENGTH | 0.594 INCHES MINIMUM AND | | 0.601 INCHES MAXIMUM | | SECOND END TAPER ANGLE | 10.0 DEGREES NOMINAL | | SURFACE FINISH | 16.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 2.740 INCHES MINIMUM AND | | 2.760 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.3750 INCHES NOMINAL | | SPECIAL FEATURES | SMALL CHAMFER END MAY BE 0.047 MIN AND 0.125 IN. MAX RADIUS IN LIEU OF CHAMFER |
|
|