|
|
|
National Stock Number:
5315-01-068-8277
Federal Supply Class:
5315
National Item Identification Number:
010688277
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 732044-29 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| UNDER HEAD LENGTH | 0.639 INCHES MINIMUM AND | | 0.649 INCHES MAXIMUM | | DIAMETER | 0.0932 INCHES MINIMUM AND | | 0.0934 INCHES MAXIMUM | | HEAD STYLE | FLAT | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | HS2776 PER HS178,73030 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CHROMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | HS246,73030 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | CHAMFER LENGTH | 0.005 INCHES MINIMUM AND | | 0.025 INCHES MAXIMUM | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.170 INCHES MINIMUM AND | | 0.190 INCHES MAXIMUM | | HEIGHT | 0.025 INCHES MINIMUM AND | | 0.045 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.031 INCHES MINIMUM AND | | 0.036 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.054 INCHES NOMINAL | | SURFACE FINISH | 125.0 MICROINCHES ALL OTHER SURFACES | | 32.0 MICROINCHES OUTSIDE DIAMETER | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 73030 | | DESIGN CONTROL REFERENCE | 732044-29 |
|
|