|
|
|
National Stock Number:
5315-01-095-4785
Federal Supply Class:
5315
National Item Identification Number:
010954785
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 39496 | 34228 | L3 TECHNOLOGIES, INC. | | 908B039496 | 34228 | L3 TECHNOLOGIES, INC. | | 908B039496 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| MATERIAL | STEEL CORROSION RESISTING OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS-5643,17-4PH,COND H-900 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER LENGTH | 0.050 INCHES NOMINAL | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.203 INCHES MINIMUM AND | | 0.205 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.230 INCHES NOMINAL | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | PIN OVERALL LENGTH | 2.292 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.3703 INCHES MINIMUM AND | | 0.3705 INCHES MAXIMUM | | SPECIAL FEATURES | FIRST END FLATTED 0.063 IN. PORM 0.005 IN. THK BY 0.562 IN. LG AND BEVEED 13 TO 14 DEG BY 0.250 IN. LG |
|
|