|
|
|
National Stock Number:
5315-01-120-8282
Federal Supply Class:
5315
National Item Identification Number:
011208282
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 10122924 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 196B7638-1 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 304 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND | | 0.060 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SQUARE | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.077 INCHES MINIMUM AND | | 0.081 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.610 INCHES MINIMUM AND | | 1.630 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES OUTSIDE DIAMETER | | PIN OVERALL LENGTH | 2.710 INCHES MINIMUM AND | | 2.750 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.2495 INCHES MINIMUM AND | | 0.2505 INCHES MAXIMUM |
|
|