| MATERIAL | STEEL COMP 410 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND |
| 43.0 ROCKWELL C MAXIMUM OVERALL |
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 0.812 INCHES NOMINAL |
| SHOULDER WIDTH ACROSS FLATS | 0.310 INCHES MINIMUM AND |
| 0.312 INCHES MAXIMUM |
| SHANK DIAMETER | 0.375 INCHES NOMINAL |
| OVERALL LENGTH | 1.750 INCHES NOMINAL |
| FIRST END STYLE | SQUARE |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| FIRST END LOCATION | BOTH ENDS |
| FIRST HOLE DIAMETER | 0.156 INCHES MINIMUM AND |
| 0.160 INCHES MAXIMUM |
| SECOND HOLE DIAMETER | 0.156 INCHES MINIMUM AND |
| 0.160 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.190 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.875 INCHES NOMINAL |
| ANGLE BETWEEN CENTERLINE OF HOLES | 18.0 DEGREES NOMINAL |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 07878 |
| DESIGN CONTROL REFERENCE | 76192-01 |