|
|
|
National Stock Number:
5315-01-122-4867
Federal Supply Class:
5315
National Item Identification Number:
011224867
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 709-4789050 ITEM 6 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| MATERIAL | NICKEL ALLOY 400 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 2.030 INCHES NOMINAL | | SHOULDER DIAMETER | 0.880 INCHES NOMINAL | | SHANK DIAMETER | 0.485 INCHES MINIMUM AND | | 0.488 INCHES MAXIMUM | | OVERALL LENGTH | 3.370 INCHES NOMINAL | | SECOND SHANK DIAMETER | 0.610 INCHES MINIMUM AND | | 0.615 INCHES MAXIMUM | | SECOND SHANK LENGTH | 1.160 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER LENGTH | 0.130 INCHES NOMINAL | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END LOCATION | SMALL END | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.156 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.250 INCHES NOMINAL | | SPECIAL FEATURES | ONE FLAT ON SHOULDER DIA PARALLEL WITH DRILLED HOLE |
|
|