|
|
|
National Stock Number:
5315-01-123-7234
Federal Supply Class:
5315
National Item Identification Number:
011237234
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 10122945 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 196B7770-5 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.478 INCHES MINIMUM AND 1.482 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.290 INCHES MINIMUM AND 0.330 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.060 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | PIN OVERALL DIAMETER | 0.3100 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM | | PIN OVERALL LENGTH | 3.280 INCHES MINIMUM AND 3.320 INCHES MAXIMUM | | MATERIAL | STEEL COMP 4140 OVERALL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
|
|