| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.125 INCHES NOMINAL |
| FIRST END LOCATION | LONG END |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM |
| HARDNESS RATING | 30.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| OVERALL LENGTH | 1.520 INCHES MINIMUM AND 1.560 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5613 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| SECOND END STYLE | SQUARE |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND SHANK DIAMETER | 0.220 INCHES MINIMUM AND 0.221 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 1.385 INCHES MINIMUM AND 1.415 INCHES MAXIMUM |
| SHANK DIAMETER | 0.2200 INCHES MINIMUM AND 0.2215 INCHES MAXIMUM |
| SHANK LENGTH | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| SPECIAL FEATURES | OD OF LONG SHANK MAY INCREASE TO 0.224 IN. AFTER FIRST 0.700 IN.; BOTH ENDS OF HOLE ARE COUNTERSUNK 60.0 DEG TO 0.110 IN. DIA |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE FINISH | 32.0 MICROINCHES LONG SHANK |