|
|
|
National Stock Number:
5315-01-126-9280
Federal Supply Class:
5315
National Item Identification Number:
011269280
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 1851-11/22 | 56848 | UNITED STATES DEPARTMENT OF TREASURY MINT PROCUREMENT DIV | | B-172475/1851-11/22 | 56848 | UNITED STATES DEPARTMENT OF TREASURY MINT PROCUREMENT DIV |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 2.125 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.125 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL | STEEL OVERALL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | PIN OVERALL DIAMETER | 1.1780 INCHES NOMINAL | | PIN OVERALL LENGTH | 4.625 INCHES NOMINAL | | SPECIAL FEATURES | PLATE WELDED TO DRILLED END,CENTRALLY LOCATED,3.750 IN. LONG X 1.125 IN. WIDE X 0.500 IN. THICK WITH 2 0.562 IN. DIA THRU-DRILLS CENTRALLY LOCATED ALONG WIDTH AND 2.500 IN. CENTER TO CENTER DISTANCE BETWEEN HOLES; 0.438 IN. DIA HOLE DRILLED THROUGH CENTER OF PLATE INTO CENTER OF PIN 3.000 IN. DEEP | | SURFACE FINISH | 125.0 MICROINCHES OUTSIDE DIAMETER |
|
|