|
|
|
National Stock Number:
5315-01-130-1279
Federal Supply Class:
5315
National Item Identification Number:
011301279
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 10123012 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | ST3M681-1-29 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| UNDER HEAD LENGTH | 1.022 INCHES MINIMUM AND | | 1.042 INCHES MAXIMUM | | DIAMETER | 0.122 INCHES MINIMUM AND | | 0.124 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | STEEL COMP XM-13 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND | | 50.0 ROCKWELL C MAXIMUM OVERALL | | SHEAR STRENGTH | 3020 DOUBLE POUNDS PER SQUARE INCH | | CHAMFER LENGTH | 0.046 INCHES NOMINAL | | PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.250 INCHES NOMINAL | | HEIGHT | 0.046 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.060 INCHES MINIMUM AND | | 0.080 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.137 INCHES NOMINAL |
|
|