|
|
|
National Stock Number:
5315-01-130-2605
Federal Supply Class:
5315
National Item Identification Number:
011302605
Description:
PIN,GROOVED,HEADLESS
Detail:
A headless item of various shapes, usually cylindrical, having either circular or longitudinal groove(s). Its length must not exceed 12 inches (304 MM). Excludes ROD, GROOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
|
Manufacturer Information:
| 10123014 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 7320002-1 | 19133 | MCDONNELL DOUGLAS CORP MCDONNELL DOUGLAS AEROSPACE OPNS WEST | | 7320002-1 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL COMP 410 OR | | STEEL COMP 416 OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND | | 42.0 ROCKWELL C MAXIMUM OVERALL | | SHEAR STRENGTH | 4000 DOUBLE POUNDS PER SQUARE INCH | | STYLE DESIGNATOR | GROOVE | | OVERALL LENGTH | 1.000 INCHES NOMINAL | | DIAMETER | 0.188 INCHES NOMINAL | | EFFECTIVE LENGTH | 0.212 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.120 INCHES NOMINAL | | UNDERCUT WIDTH | 0.200 INCHES NOMINAL | | UNDERCUT RADIUS | 0.060 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.188 INCHES NOMINAL | | FIRST END TAPER ANGLE | 4.0 DEGREES MINIMUM AND | | 16.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER LENGTH | 0.023 INCHES MINIMUM AND | | 0.062 INCHES MAXIMUM | | SECOND END TAPER ANGLE | 25.0 DEGREES NOMINAL | | FIRST END LOCATION | TAPERED END | | SURFACE FINISH | 125.0 MICROINCHES ALL OTHER SURFACES | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 19133 | | DESIGN CONTROL REFERENCE | 7320002-1 |
|
|