|
|
|
National Stock Number:
5315-01-130-7865
Federal Supply Class:
5315
National Item Identification Number:
011307865
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 10123019 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 68A870638-2003 | 13539 | C & H HYDRAULICS, INC | | 68A870638-2003 | 6N016 | C&H HYDRAULICS INC | | 68A870638-2003 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.040 INCHES MINIMUM AND 0.070 INCHES MAXIMUM | | FIRST END LOCATION | THREADED END | | OVERALL LENGTH | 1.070 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-9047 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | TITANIUM ALLOY UNS R56400 OVERALL | | NOMINAL THREAD SIZE | 0.250 INCHES | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 39.5 DEGREES MINIMUM AND 40.5 DEGREES MAXIMUM | | SECOND END TAPER LENGTH | 0.230 INCHES NOMINAL | | SECOND END TIP RADIUS | 0.060 INCHES NOMINAL | | SECOND SHANK DIAMETER | 0.2435 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM | | SECOND SHANK LENGTH | 0.530 INCHES NOMINAL | | SHANK DIAMETER | 0.2550 INCHES MINIMUM AND 0.2560 INCHES MAXIMUM | | SHANK LENGTH | 0.440 INCHES NOMINAL | | SHOULDER WIDTH ACROSS FLATS | 0.625 INCHES NOMINAL | | SPECIAL FEATURES | DRY FILM LUBRICANT ON SHANK PORTION | | STYLE DESIGNATOR | SHOULDER | | SURFACE FINISH | 63.0 MICROINCHES SHORT SHANK END | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.400 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNF |
|
|