|
|
|
National Stock Number:
5315-01-131-2464
Federal Supply Class:
5315
National Item Identification Number:
011312464
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 100174 | 51489 | PRC COMPOSITES, LLC |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.040 INCHES NOMINAL | | FIRST END LOCATION | THREADED END | | OVERALL LENGTH | 2.120 INCHES NOMINAL | | MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316F OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 317L OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OR STEEL COMP 303F OR STEEL COMP 303S OR STEEL COMP 323 OR STEEL COMP 324 OVERALL | | NOMINAL THREAD SIZE | 0.250 INCHES | | SECOND END OUTER RADIUS | 0.188 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | ROUND | | SHANK DIAMETER | 0.250 INCHES NOMINAL | | SHANK LENGTH | 1.120 INCHES NOMINAL | | SHOULDER DIAMETER | 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM | | SPECIAL FEATURES | TWO PARALLEL SYMMETRICAL FLATS ON SHOULDER 0.500 IN. NOM LG 0.312 IN. NOM W BETWEEN FLATS ADJACENT TO THREAD | | STYLE DESIGNATOR | SHOULDER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2A | | THREAD LENGTH | 1.000 INCHES MINIMUM | | THREAD SERIES DESIGNATOR | UNF |
|
|