|
|
|
National Stock Number:
5315-01-132-4545
Federal Supply Class:
5315
National Item Identification Number:
011324545
Description:
PIN,GROOVED,HEADED
Detail:
A CYLINDRICALLY-SHAPED HEADED ITEM, HAVING CIRCULAR OR LONGITUDINAL GROOVE(S).
|
Manufacturer Information:
| 2040782-1 | 70210 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | HEAD STYLE | FLAT CHAMFER | | MATERIAL | STEEL COMP E52100 OVERALL | | STYLE DESIGNATOR | GROOVE | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6444 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 90.0 ROCKWELL SUPERFICIAL 15-N MINIMUM OVERALL | | DIAMETER | 0.3120 INCHES MINIMUM AND | | 0.3125 INCHES MAXIMUM | | EFFECTIVE LENGTH | 0.110 INCHES MINIMUM AND | | 0.120 INCHES MAXIMUM | | UNDERCUT DIAMETER | 0.200 INCHES MINIMUM AND | | 0.202 INCHES MAXIMUM | | UNDER HEAD LENGTH | 3.190 INCHES MINIMUM AND | | 3.210 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.094 INCHES MINIMUM AND | | 0.104 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 29.0 DEGREES MINIMUM AND | | 30.0 DEGREES MAXIMUM | | PIN HEAD DIAMETER | 0.625 INCHES NOMINAL | | HEIGHT | 0.120 INCHES MINIMUM AND | | 0.140 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.0943 INCHES MINIMUM AND | | 0.0948 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.131 INCHES MINIMUM AND | | 0.161 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES UNDERCUT | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 70210 | | DESIGN CONTROL REFERENCE | 2040782-1 |
|
|