| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.140 INCHES NOMINAL |
| FIRST END STYLE | SQUARE |
| FIRST END LOCATION | SQUARE END |
| FIRST HOLE DIAMETER | 0.0650 INCHES MINIMUM AND 0.0700 INCHES MAXIMUM |
| HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| INTERNAL DRIVE STYLE | SOCKET |
| OVERALL LENGTH | 0.925 INCHES MINIMUM AND 0.945 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5612 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 410 OVERALL |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| SECOND END COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL |
| SECOND END COUNTERSINK DIAMETER | 0.120 INCHES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED AND COUNTERSUNK |
| SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END TAPER LENGTH | 0.035 INCHES NOMINAL |
| SECOND UNDERCUT DIAMETER | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| SECOND UNDERCUT WIDTH | 0.090 INCHES NOMINAL |
| SECOND SHANK DIAMETER | 0.198 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 0.070 INCHES NOMINAL |
| SHANK DIAMETER | 0.190 INCHES MINIMUM |
| SHANK LENGTH | 0.500 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.240 INCHES MINIMUM AND 0.245 INCHES MAXIMUM |
| STYLE DESIGNATOR | UNDERCUT |
| WIDTH BETWEEN FLATS | 0.0937 INCHES MAXIMUM |
| SURFACE FINISH | 32.0 MICROINCHES BOTH ENDS |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3A |
| THREAD LENGTH | 0.640 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNJF |
| UNDERCUT DIAMETER | 0.130 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.070 INCHES NOMINAL |