|
|
|
National Stock Number:
5315-01-133-5977
Federal Supply Class:
5315
National Item Identification Number:
011335977
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 10123089 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 3M39C4-53 | 76301 | THE BOEING COMPANY | | C014062-1 | 88277 | THE BOEING COMPANY | | C014062-1 | 8V613 | THE BOEING COMPANY |
|
Techincal Specification:
| UNDER HEAD LENGTH | 1.834 INCHES MINIMUM AND | | 1.854 INCHES MAXIMUM | | DIAMETER | 0.309 INCHES MINIMUM AND | | 0.311 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | STYLE DESIGNATOR | STRAIGHT | | MATERIAL | IRON ALLOY 660 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR | | AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SHEAR STRENGTH | 95000 SINGLE POUNDS PER SQUARE INCH | | CHAMFER LENGTH | 0.078 INCHES NOMINAL | | PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.437 INCHES NOMINAL | | HEIGHT | 0.062 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.096 INCHES MINIMUM AND | | 0.116 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.135 INCHES NOMINAL | | SPECIAL FEATURES | SOLID FILM LUBRICANT TYPE 2 PER DPS 3.77 ON GRIP SURFACE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 88277 | | DESIGN CONTROL REFERENCE | C014062-1 |
|
|