|
|
|
National Stock Number:
5315-01-134-4951
Federal Supply Class:
5315
National Item Identification Number:
011344951
Description:
PIN,STRAIGHT,KNURLED
Detail:
A HEADLESS, CYLINDRICALLY-SHAPED, STRAIGHT, SOLID ITEM WITH OR WITHOUT A DRILLED HOLE(S). IT HAS A STRAIGHT OR DIAMOND KNURL. ITS LENGTH MUST NOT EXCEED 12 INCHES (304 MM). IT IS USED FOR ALIGNING OR TRANSFER OF TORQUE AND/OR THRUST, BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM.
|
Manufacturer Information:
| 4195172 | 80212 | BAE SYSTEMS LAND & ARMAMENTS L.P. |
|
Techincal Specification:
| DIAMETER | 0.2495 INCHES MINIMUM AND 0.2505 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.771 INCHES NOMINAL | | FIRST END STYLE | SQUARE | | FIRST HOLE DIAMETER | 0.078 INCHES MINIMUM AND 0.081 INCHES MAXIMUM | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | KNURL LENGTH | 0.500 INCHES NOMINAL | | KNURL OUTSIDE DIAMETER | 1.250 INCHES NOMINAL | | OVERALL LENGTH | 2.516 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108 OR ST-52-3N DIN 17100 ASSN STD 1ST MATERIAL RESPONSE OR 1010 THRU 1020 ASSN STD 2ND MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4130 OR STEEL COMP 4140 OR STEEL COMP 8630 OR STEEL COMP 8640 SHANK | | MATERIAL | STEEL HEAD | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED W/THRU HOLE | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.062 INCHES NOMINAL | | STYLE DESIGNATOR | DIAMOND KNURLED |
|
|