|
|
|
National Stock Number:
5315-01-135-3662
Federal Supply Class:
5315
National Item Identification Number:
011353662
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 3141410-109-1 | 99696 | LOCKHEED MARTIN CORPORATION DIV LOCKHEED MARTIN SYSTEMS & GLOBAL SOLUTIONS |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.430 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 7.630 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.257 INCHES MINIMUM AND 0.262 INCHES MAXIMUM | | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM OVERALL AND 47.0 ROCKWELL C MAXIMUM OVERALL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-C-24111 COND 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 630 OVERALL | | PIN OVERALL DIAMETER | 0.6250 INCHES NOMINAL | | PIN OVERALL LENGTH | 8.310 INCHES NOMINAL | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 15.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.250 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND HOLE DIAMETER | 0.187 INCHES MINIMUM AND 0.192 INCHES MAXIMUM | | SPECIAL FEATURES | FIRST END SLOTTED 0.100 IN. W BY 0.560 IN. DP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
|
|