|
|
|
National Stock Number:
5315-01-136-7505
Federal Supply Class:
5315
National Item Identification Number:
011367505
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 4213 | 89256 | NAVAL SHIP ENGINEERING CENTER PHILADELPHIA DIV | | 4213-01 | 89256 | NAVAL SHIP ENGINEERING CENTER PHILADELPHIA DIV | | 4381-11 | 89256 | NAVAL SHIP ENGINEERING CENTER PHILADELPHIA DIV | | 4382 PIECE 12 | 89256 | NAVAL SHIP ENGINEERING CENTER PHILADELPHIA DIV | | 4381 | D9182 | ZF INDUSTRIEANTRIEBE WITTEN GMBH |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.125 INCHES NOMINAL | | FIRST END LOCATION | BOTH ENDS | | FIRST END STYLE | SQUARE | | FIRST HOLE DIAMETER | 0.040 INCHES NOMINAL | | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM OVERALL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | INTERNAL DRIVE STYLE | CROSS RECESS TYPE II | | OVERALL LENGTH | 2.935 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 440C OVERALL | | NOMINAL THREAD SIZE | 0.688 INCHES | | SPECIAL FEATURES | 0.375 IN. W SQUARE END | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND SHANK DIAMETER | 0.343 INCHES NOMINAL | | SECOND SHANK LENGTH | 1.860 INCHES NOMINAL | | SHANK LENGTH | 0.250 INCHES NOMINAL | | SHOULDER DIAMETER | 0.844 INCHES NOMINAL | | SURFACE FINISH | 20.0 MICROINCHES SHOULDER END | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.388 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNEF | | UNDERCUT DIAMETER | 0.625 INCHES NOMINAL | | UNDERCUT WIDTH | 0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
|
|