|
|
|
National Stock Number:
5315-01-137-7183
Federal Supply Class:
5315
National Item Identification Number:
011377183
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| 0126093-2 | 02227 | NAVAL ELECTRONIC SYSTEMS SECURITY ENGINEERING CENTER | | 619-0784-002 | 13499 | ROCKWELL COLLINS, INC. |
|
Techincal Specification:
| CHAMFER LENGTH | 0.050 INCHES NOMINAL | | DIAMETER | 0.166 INCHES MINIMUM AND 0.170 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.825 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.112 INCHES NOMINAL | | HEAD STYLE | SQUARE | | HEAD WIDTH | 0.188 INCHES NOMINAL | | HEIGHT | 0.450 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | DRILLED THRU HEAD | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582,COND A ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 303 OVERALL | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | SPECIAL FEATURES | CENTER HOLE INCLUDES 4-40 UNC 2B THREAD,TWO ADDITIONAL HOLES ON EITHER SIDE OF THREADED HOLE,CENTER TO CENTER DISTANCE BETWEEN HOLES 0.150 IN. ALONG HEIGTH,0.062 IN. MIN,0.055 IN. MAX DIA OF ADDITIONAL HOLES | | STYLE DESIGNATOR | STRAIGHT | | UNDER HEAD LENGTH | 0.600 INCHES NOMINAL |
|
|