|
|
|
National Stock Number:
5315-01-141-4074
Federal Supply Class:
5315
National Item Identification Number:
011414074
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 10123134 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 74A411512-2001 | 18463 | CARDEN MACHINE SHOP, INC. | | 74A411512-2001 | 2V343 | APEX MANUFACTURING COMPANY, INC. | | 74A411512-2001 | 6Z056 | CM MANUFACTURING INC | | 74A411512=2001 | 6Z056 | CM MANUFACTURING INC | | 74A411512-2001 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SHANK | | STEEL COMP XM-13 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | STYLE DESIGNATOR | UNDERCUT | | SHANK LENGTH | 0.400 INCHES NOMINAL | | SHOULDER DIAMETER | 1.103 INCHES MINIMUM AND | | 1.113 INCHES MAXIMUM | | SHANK DIAMETER | 0.530 INCHES NOMINAL | | OVERALL LENGTH | 2.400 INCHES NOMINAL | | UNDERCUT DIAMETER | 0.775 INCHES MINIMUM AND | | 0.785 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.090 INCHES NOMINAL | | SECOND SHANK DIAMETER | 0.8730 INCHES MINIMUM AND | | 0.8740 INCHES MAXIMUM | | SECOND SHANK LENGTH | 2.030 INCHES MINIMUM AND | | 2.040 INCHES MAXIMUM | | FIRST END STYLE | COUNTERSUNK | | FIRST END COUNTERSINK DIAMETER | 0.396 INCHES MINIMUM AND | | 0.406 INCHES MAXIMUM | | FIRST END COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED AND COUNTERBORED | | SECOND END TAPER LENGTH | 0.130 INCHES NOMINAL | | SECOND END COUNTERBORE DIAMETER | 0.650 INCHES NOMINAL | | SECOND END COUNTERBORE DEPTH | 2.120 INCHES NOMINAL | | SECOND END TAPER ANGLE | 15.0 DEGREES NOMINAL | | FIRST END LOCATION | SMALL END |
|
|