|
|
|
National Stock Number:
5315-01-142-9468
Federal Supply Class:
5315
National Item Identification Number:
011429468
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 209F576-7 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| FIRST END STYLE | SQUARE | | HARDNESS RATING | 58.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 440C OVERALL | | SPECIAL FEATURES | 0.255 IN. DIA HOLE DRILLED PARALLEL TO THE CENTER LINE,ONE HOLE PERPENDICULAR TO THE CENTER LINE AND 0.420 IN. IN FROM FIRST END TO CENTER OF HOLE,THD SIZE 0.138-32 UNC-2B | | PIN OVERALL LENGTH | 1.360 INCHES MINIMUM AND 1.380 INCHES MAXIMUM | | PIN OVERALL DIAMETER | 0.3743 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 20.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SURFACE FINISH | 32.0 MICROINCHES OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|