| CHAMFER LENGTH | 0.035 INCHES NOMINAL |
| DIAMETER | 0.991 INCHES MINIMUM AND 0.996 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.187 INCHES NOMINAL |
| FIRST HOLE DIAMETER | 0.167 INCHES MINIMUM AND 0.182 INCHES MAXIMUM |
| HARDNESS RATING | 70.0 ROCKWELL SUPERFICIAL 30-N MINIMUM OVERALL |
| HEAD STYLE | FLAT CHAMFER |
| HEIGHT | 0.334 INCHES MINIMUM AND 0.354 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL |
| MATERIAL | STEEL COMP 1010 OR STEEL COMP 1111 OVERALL |
| PIN CHAMFER ANGLE | 40.0 DEGREES MINIMUM AND 45.0 DEGREES MAXIMUM |
| PIN HEAD DIAMETER | 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM |
| SHEAR STRENGTH | 51800 DOUBLE POUNDS PER SQUARE INCH |
| STYLE DESIGNATOR | STRAIGHT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY2 CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| UNDER HEAD LENGTH | 2.406 INCHES MINIMUM AND 2.426 INCHES MAXIMUM |