|
|
|
National Stock Number:
5315-01-148-2574
Federal Supply Class:
5315
National Item Identification Number:
011482574
Description:
PIN,GROOVED,HEADED
Detail:
A CYLINDRICALLY-SHAPED HEADED ITEM, HAVING CIRCULAR OR LONGITUDINAL GROOVE(S).
|
Manufacturer Information:
| 65B9768 | 19204 | ARMY, UNITED STATES DEPARTMENT OF THE |
|
Techincal Specification:
| FIRST END STYLE | SQUARE | | HEAD STYLE | FLAT FILLISTER | | MATERIAL | STEEL OVERALL | | STYLE DESIGNATOR | GROOVE | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-46850,MARAGING,TYPE III,GRADE 300 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 50.0 ROCKWELL C MINIMUM AND | | 58.0 ROCKWELL C MAXIMUM OVERALL | | PILOT DIAMETER | 0.100 INCHES NOMINAL | | PILOT LENGTH | 0.095 INCHES NOMINAL | | DIAMETER | 0.089 INCHES NOMINAL | | UNDER HEAD LENGTH | 0.490 INCHES NOMINAL | | PIN HEAD DIAMETER | 0.125 INCHES NOMINAL | | HEIGHT | 0.110 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | DRILLED THRU HEAD | | FIRST HOLE DIAMETER | 0.062 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.540 INCHES NOMINAL | | FEATURES PROVIDED | LOCK PIN | | SPECIAL FEATURES | MATERIAL SPECIFICATIONS ARE BEFORE SOLUTION AND AGE HEAT TREATMENT; YIELD,STRENGTH- MIN. 270 KSI; TENSILE STRENGTH= MIN. 275 KSI; ELONGATION AT 4XDIA,30% REDUCTION OF AREA,15 FT-LBS CHARPY IMPACT; END ITEM NSN = 4933-00-078-2404 | | CUBIC MEASURE | 0.00937 CUBIC INCHES | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 19204 | | DESIGN CONTROL REFERENCE | 65B9768 |
|
|